The MAKO® 236 CC is a versatile midsized offshore boat with a fine balance of creature comforts and hardcore fishability. Boat seating with removable backrests and drained storage beneath, as well as a center transom jump seat, keeps the family comfortable. Dual aft livewells and two 135-qt. fishboxes in the roomy aft area make fishing easy.

With the legendary MAKO overbuilt Deep V hull, it’s ready for virtually any offshore adventure. And it’s backed by MAKO Assurance—the best factory warranty in saltwater boats.

  • Backed by MAKO® Assurance 5+Life—the best factory warranty in saltwater boats
  • Forward seat cushions, removable backrests & optional bow filler/table
  • Port & starboard forward seating w/247-qt. (233.75 L) insulated storage & drains below
  • 2 aft 22-gal. (84.23 L) rounded livewells w/angled fills & friction-hinged acrylic lids
  • Console w/Garmin® GPSMAP® 8610 chartplotter MFD, Mercury® SmartCraft® digital gauges, standard digital switching through multifunction displays, trim tab switches & custom anodized aluminum steering wheel w/knob & dual-cylinder hydraulic steering
  • Port tuna/dive/boarding door w/hinged gate & stainless steel ring
  • In-console head w/gelcoated surfaces, 6' (1.83 m) clearance & wiring access
  • Integrated forward-console seat w/52-qt. (49.21 L) insulated, drained cooler
  • Custom aluminum leaning post w/flip-up bolster, 84-qt. (79.49 L) cooler & rod holders
  • Optional leaning post baitwell
  • Canvas T-top w/electronics box
  • 135-qt. (127.76 L) aft port & starboard in-deck fishboxes w/gravity drains & diaphragm pump
  • Flush-folding, cushioned center transom jump seat

Basic Boat Info

Make: Mako
Model: 236 CC
Year: 2021
Category: Power
Construction: Fiberglass

Dimensions

Length: 23'4 ft
Length Overall: 23'4 ft
Beam: 8'6 ft
Max Draft: 1'6 ft
Dry Weight: 5,010 lb
Deadrise: 21 °

Engines / Speed

Engines: 2
Engine #1 Specs:
  • Type: Outboard
Engine #2 Specs:
  • Type: Outboard

Tanks

Fuel Tanks: 1
Fuel Tank Capacity: 136 gal

Other

Maximum Number Of Passengers: 11
Boat Class: Center Consoles, Saltwater Fishing
Additional Specs
  • Length:23' 4" 
  • Beam: 8' 6" 
  • Bottom width: 6' 10" 
  • Max. Recommended HP: 350 HP
  • Fuel Capacity: 136 gal.
  • Max. Person Capacity: 11 persons
  • Max. person weight: 2040 lbs.
  • Max. person, motor & gear weight: 3375 lbs.
  • Interior depth: 32" 
  • Transom height at center line: 30" 
  • Deadrise: 21 degrees
  • Draft: 18" 
  • Dry weight: 5010 lbs.
  • Average hull weight: 4100 lbs.
  • Average package weight: 7200 lbs.
  • Package height w/T-top or hardtop: 12' 0" 
  • Storage Length: 32' 10" 
Standard Features

Certification & Safety

  • Backed by MAKO® Assurance 5+Life—the best factory warranty in saltwater boats
  • NMMA® certified
  • Factory leak tested for hull, plumbing & fitting integrity
  • Horn
  • Flush-mounted Ritchie Navigation® Voyager compass

Console

  • Garmin® GPSMAP® 8610 chartplotter MFD w/Mercury® SmartCraft® digital gauges
  • Digital switching through multifunction displays
  • Custom anodized aluminum steering wheel w/knob
  • Binnacle-mounted motor control(s)
  • Dual-cylinder hydraulic steering
  • Trim tab switches w/position indicator lights & auto retract
  • Powdercoated aluminum battery switch panel w/labels, main power shutoff, emergency parallel switch, removable knobs & voltage sensing relays (VSR)
  • Switch panel w/manual reset circuit breakers & illuminated switches
  • Easy access to helm electronics, instruments & switches
  • FUSION stereo w/4 lighted speakers
  • Integrated forward-console seat w/52-qt. (49.21 L) insulated, drained cooler
  • Integrated full-width fiberglass footrest w/non-skid surface
  • Tempered safety glass windshield w/aluminum frame
  • Marine-grade tinned wiring w/submersible connectors
  • Lockable, sealed glovebox
  • Portlight
  • Extra-large electronics mounting surface 
  • 2 console drink holders
  • 12V DC outlet & dual USB ports

Leaning Post

  • Custom aluminum leaning post
  • Flip-up bolster
  • 84-qt. (79.49 L) cooler below leaning post
  • Rod holders

Top

  • Canvas T-top
  • .25" (6.35 mm) aluminum backing-plate reinforcement for T-top
  • Electronics box

Head

  • Gelcoat-finished surface, wiring access hatches, battery switch panel & 6' (1.83 m) head room

Interior

  • Anchor locker
  • 2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating & composite substrates on seats
  • Port & starboard forward seats w/247-qt. (233.75 L) insulated storage below w/gravity overboard drainage
  • 278-qt. (263.09 L) bow center in-deck storage compartment
  • Low-profile powdercoated aluminum bow rails
  • Self-bailing cockpit w/transom valves
  • 2 port & 2 starboard gunnel-mounted rod holders
  • Port & starboard under-gunnel rod racks for 6 rods up to 7' (2.13 m) long
  • Freshwater shower w/pull-out spray head
  • Tuna/dive/boarding door w/hinged gate & stainless steel ring
  • Flush-folding, cushioned center transom jump seat
  • 135-qt. (127.76 L) aft port & starboard in-deck fishboxes w/gravity drains & diaphragm pump
  • 4 transom-mounted rod holders
  • 2 aft 22-gal. (84.23 L) rounded livewells w/angled fills & friction-hinged acrylic lids
  • Aft starboard recessed tool & leader holder
  • Molded non-skid surfaces throughout
  • Bilge access hatch
  • 360° coaming bolsters
  • Aft port & starboard coaming bolsters
  • Six 8" (20.32 cm) stainless steel, anti-rattle pop-up cleats
  • 2 bow drink holders

Performance

  • Legendary dry-riding MAKO® hull
  • Aggressive deep V hull design
  • Performance lifting strakes
  • Recessed electric trim tabs
  • Factory-matched stainless steel propeller(s)

Construction & Exterior

  • Color: MAKO® Bone White gelcoat
  • Ring deck design for more usable interior space
  • 100% composite construction
  • Coosa® Bluewater 100% composite transom core
  • Heavy-duty, fiberglass-encapsulated transom w/2" (5.08 cm) fiberglass-impregnated, high-density composite core
  • Hull/deck joint chemically sealed & bonded 360° & mechanically fastened every 6" (15.24 cm) w/316 stainless steel fasteners
  • 1-piece molded fiberglass stringer grid w/integrated transom knee supports & gelcoat finish
  • Closed-cell foam-injected stringer grid for USCG-approved flotation
  • Heavy-duty rub rail w/stainless steel insert
  • Premium marine-grade stainless steel hardware & fasteners for corrosion resistance
  • Heavy duty extra thick, closed-molded hatch covers w/finished undersides & integrated gaskets
  • Aluminum backing plates for cleats & chocks
  • 3-step, stowable dive ladder
  • Port & starboard molded-in swim platforms
  • Recessed, pull-out, telescoping boarding ladder

Electrical, Mechanical & Plumbing Systems

  • Portable toilet
  • Sea Chest keeps 3 pumps submerged for cooler running & longer life
  • Automatic 2,000 GPH (7,570.82 LPH) bilge pump
  • 1,100 GPH (4,163.95 LPH) livewell pump
  • Pressurized raw water washdown pump
  • High-speed raw water intake
  • Transom w/freshwater washdown
  • Pressurized freshwater pump
  • 6-gal. (22.71 L) freshwater tank
  • USCG-compliant navigation lights
  • 2 cockpit courtesy lights & 1 head light
  • 1 cranking battery per outboard
  • Dual battery rigging w/voltage sensitive relay (VSR) & emergency parallel switch
  • Marelon® corrosion-free seacocks on all below-water thru-hull fittings
  • Labeled, tinned-copper wiring for easy maintenance & protection in a marine environment
  • Pre-wired for optional anchor windlass

Optional Trailer

  • OPTIONAL tandem-axle EZ Loader® aluminum trailer available.
  • NMMA® certified.
  • DOT approved.
  • Tandem-axle brakes.
  • 14" (35.56 cm) radial tires w/galvanized V5 wheels.
  • Oil bath hubs.
  • Leaf spring suspension.
  • Heavy-duty winch w/nylon strap & safety strap.
  • Stainless steel hardware.
  • Galvanized steel components.
  • LED lighting.
  • LED marker lights.
  • PVC loading guides.
  • Galvanized fenders.

Contact Us


More From Mako


2021 Mako Pro Skiff 19 CC
2021 Mako 18 LTS
2021 Mako 21 LTS
2021 Mako 214 CC
2021 Mako 284 CC