2019 Mako 214 CC

With its wave-crushing Deep V hull and interior creature comforts, the MAKO® 214 CC is the ideal balance of predatory performance and an on-the water recreation hub. Bow and forward-console seating adds comfort for family and friends, and the optional cushions and table add a forward lounge area. It's hard to beat the fishability of this fine boat. Storage for rods, tackle, electronics and fish is more than enough for any adventure. And there's room at the helm for at least two 12" fishfinders. All this, and it's backed by MAKO Assurance 5+Life—the best warranty in the business.

Backed by the MAKO® Assurance 5+Life—the best factory warranty in the business
Foam-injected hull w/1-piece fiberglass stringer grid
Hull/deck joint chemically bonded & fastened 360° w/316 stainless steel fasteners
Under-gunnel port & starboard rod racks for 6 rods
Center console w/analog gauges, large electronics mounting surface, stainless steel grab rail, acrylic windscreen & storage
2-tone high-density marine-grade vinyl upholstery w/composite substrates on seats
Anodized aluminum leaning post w/flip-up cushion, rod holders & storage
Removable forward console seat w/72-qt. (68 L) insulated, drained cooler
Port & starboard bow seating w/108-qt. (102 L) insulated fishboxes w/drains below
210-qt. (199 L) in-deck storage w/recess for 5-gal. (18.93 L) bucket
Self-bailing cockpit & non-skid surface on walking flats, foredeck, gunnel tops, sole, stern platform & hatch covers

Additional Specs

Length:21' 5"
Beam: 8' 6"
Bottom width: 6' 7.5"
Max. recommended HP: 250 HP
Fuel capacity: 91 gal.
Max. person capacity: 10 persons
Max. person weight: 1700 lbs.
Max. person, motor & gear weight: 2550 lbs.
Interior depth: 27"
Transom height at center line: 25"
Deadrise: 18 degrees
Draft: 14"
Dry weight: 3735 lbs.
Average hull weight: 3100 lbs.
Average package weight: 4535 lbs.
Package height: 9' 3"
Package height w/T-top or hardtop: 11' 2"
Storage length: 30' 8"

Standard Features

Certification & Safety

Backed by the MAKO® Assurance 5+Life—the best factory warranty in the business
NMMA® certified
Factory leak tested for hull, plumbing & fitting integrity
Stainless steel hardware & fasteners for corrosion resistance
CorrosionX stainless spray treatment included
Horn

Console

Custom anodized aluminum steering wheel w/knob
Binnacle-mounted motor control
Gauge panel w/analog gauges
Heavy-duty electrical switching system w/battery selector switch(es)
Switch panel w/manual reset circuit breakers & illuminated switches
Easy access to helm electronics, instruments & switches
Removable forward-console seat w/72-qt. (68 L) insulated, drained cooler
Integrated full-width footrest
Acrylic windscreen
Easy-access battery storage
Marine-grade tinned wiring w/submersible connectors
Lockable, sealed glovebox
Extra-large electronics mounting surface
2 console drink holders

Construction & Exterior

100% composite construction
Coosa® Bluewater 100% composite transom core
Heavy-duty, fiberglass-encapsulated transom w/2" (5.08 cm) fiberglass-impregnated, high-density composite core
Hull/deck joint chemically sealed & bonded 360° & mechanically fastened every 6" (15.24 cm) w/316 stainless steel fasteners
1-piece molded fiberglass stringer grid w/integrated transom knee supports & gelcoat finish
Closed-cell foam-injected stringer grid for USCG-approved flotation
Premium marine-grade stainless steel hardware
Heavy-duty rub rail w/stainless steel insert
Closed-molded hatch covers w/finished undersides & integrated gaskets
Aluminum backing plates for cleats, chocks & hinges
Reboarding step
MAKO® Bone White gelcoat

Electrical, Mechanical & Plumbing Systems

High-speed raw water intake
USCG-compliant navigation lights
2 cockpit courtesy lights & 1 head light
Marelon® corrosion-free seacocks on all below-water thru-hull fittings
Labeled, tinned-copper wiring for easy maintenance & protection in a marine environment

Head

Head enclosure/storage space w/stainless steel latch
Wiring access hatch & battery access
Main distribution panel inside head
Courtesy light

Interior

Top-loading anchor locker that will accommodate 12" (30.5 cm) anchor retrieval ball
Foredeck dodger mounting boss
Port & starboard bow seats w/108-qt. (102 L) fishboxes w/gravity overboard drainage
210-qt. (199 L) in-deck storage w/recess for 5-gal. (18.93 L) bucket
Low profile brushed anodized aluminum bow rails
2 gunnel-mounted rod holders
Port & starboard under-gunnel rod racks for 6 rods up to 7' (2.1 m) long
Port & starboard aft seats w/13-gal. (49 L) aerated baitwell below port seat
Molded non-skid surfaces throughout
Bilge access hatch
Port & starboard molded-in swim platforms
Six 6" (15.24 cm) polished marine-grade stainless steel cleats

Leaning Post

Anodized aluminum leaning post
Helm seat w/flip-up cushion
Storage below seat
Space below leaning post for optional cooler
Rod holders

Optional Trailer

OPTIONAL tandem-axle EZ Loader® aluminum trailer available
NMMA® certified.
DOT approved.
Tandem-axle brakes.
14" (35.6 cm) radial tires w/galvanized V5 wheels.
Oil bath hubs.
Leaf spring suspension.
Heavy-duty winch w/nylon strap & safety strap.
Stainless steel hardware.
Galvanized steel components.
LED lighting.
PVC loading guides.

Performance

Legendary dry-riding MAKO® hull
Aggressive deep V hull design
Performance lifting strakes
Recessed electric trim tabs
Factory-matched stainless steel propeller

T-Top or Hardtop

Canvas T-top
.25" (.64 cm) aluminum backing-plate reinforcement for T-top
Aft spreader lights
Electronics box

2019 Mako 214 CC

Specifications

Media Gallery